BARDAHL: A World Without Friction

Bardahl is world famous additives and lubricants from USA with 'Polar Attraction' special chain molecules which ensure constant lubrication of all moving metal parts. Find out more about Bardahl additives series to protect your car better~

Polar Plus Triple Protection Formula

B1 Engine Treatment (Recommended Price: RM23.00)
Bardahl B1 Engine Treatment is a race proven, OEM accepted, multi-functional engine treatment product for all newer engines.

Bardahl B1 has the unique ability of protecting engines from wear and deposits. It is an extraordinary anti-wear additive with benefits of Polar Plus Triple Protection Formula and superior anti-deposit, anti-oxidation chemistries.

It prolongs engine life and increases engine efficiency by reducing deposits and using 3 layers of protection to shield engine parts against friction, heat and wear.

Great Benefits and Better Solutions
• 3 layer protection against friction, heat and wear
• Restores water tightness of piston and cylinder wall
• Increases engine output and power
• Improves lubrication of bearings, lifters and pistons
• Provides temporary engine protection in case oil leaks
• Prevents damaging ‘dry starts’
• Inhibits varnish and sludge formation
• Better fuel economy
• Longer engine life
• A safe option to extend oil change for short mileage or duration
• New Engines: Maintains peak performance
• Older Engines: Revitalizes and restores lost power

When to Use It
• Start as soon as possible if you have not used it before.
• For new cars, start with first oil change and then at each subsequent oil change.

Do It Yourself. It’s Easy!
1. For all petrol and diesel engines.
2. At every 5,000 km oil change, add one bottle into
crankcase.
3. Between oil changes, add as needed to maintain oil
level.
4. Add 1 or 2 bottles into crankcase to extend oil change for short mileage or duration.

B2 Oil Treatment (Recommended Price: RM23.00)
Bardahl B2 Oil Treatment is a thicker version of the renowned Bardahl B1 Engine Treatment and is specially designed to restore lost power and revitalize older or aging engines.

It consists of a blend of polymer, base oil, oil stabilizing chemistry and the unique Polar Plus Triple Protection formula. It reduces oil burning and blow-by, restores compression and power and uses 3 layers of protection to shield engine parts from further wear

Great Benefits and Better Solutions
• 3 layer protection against friction, heat and wear
• Reduces oil burning and exhaust smokes
• Restores lost power of aging engine
• Stops blow-by
• Reduces engine chattering
• Easier engine starting
• Helps delay expensive engine repairs
• Provides temporary protection to engine in case oil leaks

When to Use It
Suitable for old or high mileage vehicles showing signs of:
• Excessive engine oil consumption
• Emitting visible exhaust smokes

Do It Yourself. It’s Easy!
1. For all petrol and diesel engines.
2. Pour contents to crankcase of a warm, idling engine.
3. At every 5,000 km oil change, add 1 bottle. For severely worn engines, use 2 bottles if necessary.

No Smoke (Recommended Price: RM23.00)
Bardahl No Smoke is an OEM accepted engine treatment product for oil burning cars. It is specially formulated to meet or exceed vehicle manufacturers’ stringent OEM specifications.

Its extra thick formula seals the spaces between valves and guides, between piston rings and cylinder walls, thus reducing oil consumption and burning. It is the most effective additive for oil burning cars to reduce exhaust smoke and to help delay expensive engine repair temporarily.

Great Benefits and Better Solutions
• Reduces exhaust smokes
• Reduces engine oil burning
• Improves engine compression
• Reduces plugs fouling
• Improves lubrication at high temperatures
• Protects engine from further wear
• Easier engine starting
• Quieter, smoother engine operation

When to Use It
When your car shows signs of:
• Excessive exhaust smokes
• High engine oil consumption
• Ignition problem
• Dirty spark plugs
• Engine noisy and rattling

Do It Yourself. It’s Easy!
1. For all petrol and diesel engines
2. Pour contents to crankcase of a warm, idling engine.
3. At every 5,000 km oil change, add one bottle or as needed to stop smoke emission.
4. Between oil changes, add as needed to stop smoke emission.

Kiwami Power Boosting Engine Treatment (Recommended Price: RM39.00)
Bardahl Kiwami Power Booster is a premium grade of engine treatment formulated with synthetic base oil, low temperature viscosity modifiers, superior anti-oxidation chemistries, advanced friction fighters and the unique Polar Plus Triple Protection formula that uses 3 layers of protection to shield engine parts against friction, heat and wear.

When added to any premium grade engine oil, Bardahl Kiwami provides the ultimate lubrication for both new and used engines, minimizes friction and wear and offers extra engine power, improved fuel economy, longer engine life and reduced maintenance and repair costs.

It was originally developed for quality conscious Japanese car professionals but now available worldwide.

Great Benefits and Better Solutions
• 3 layer protection against friction, heat & wear
• Increases engine output and power
• Improves fuel economy
• Prevents ‘dry starts’
• Extends turbocharger life
• A safe option to extend oil change for short mileage or duration
• Prevents varnish and sludge formation
• Improves lubrication of bearings, lifters & pistons
• Provides temporary engine protection in case of oil leaks
• Longer engine life and saves on repairs
• New Engines: Maintains peak performance
• Older Engines: Restores lost power

When to Use It
Start as soon as possible if you have not used it before.
For new cars, start with first oil change and then at each subsequent oil change.

Do It Yourself. It’s Easy!
1. For all petrol and diesel engines.
2. At every 5,000 km oil change, add one bottle into crankcase irrespective of engine size.
3. Between oil changes, add as needed to maintain oil level.
4. Add one or two bottles into crankcase to extend oil change for short mileage or duration.

Special Duty Power Booster (Recommended Price: RM42.00)
Special Duty is the thicker, stronger, heavy duty version of the renowned Bardahl B1 Engine Treatment. It is specially formulated for trucks, trailers and heavy-duty machinery to improve their ability to take severe stress, extend their oil drain intervals and lengthen their serviceable life spans.

It contains outstanding oil stabilizing, deposit control and dispersant chemistries as well as the unique Polar Plus Triple Protection Formula that uses 3 layers of protection to shield engine parts against friction, heat and wear. It is an OEM accepted, multi-functional engine treatment product.

Great Benefits and Better Solutions
• 3 layer protection against friction, heat and wear
• Better fuel economy
• Maintains and restores water tightness of piston & cylinder wall
• Protects against excessive oil temperature
• Temporary engine protection in case of oil leaks
• Prevents damaging ‘dry starts’
• Longer oil drain intervals
• Reduces, removes soot & deposits
• Longer engine life
• New Engines: Maintains peak performance
• Old Engines: Revitalizes and restores lost power

When to Use It
• Start as soon as possible if you have not used it before!
• For new vehicles, start with first oil change and then at each subsequent oil change.

Do It Yourself. It’s Easy!
1. For all petrol and diesel engines.
2. Pour contents into crankcase of warm, idling engine.
3. At each oil change, add at 20% treatment ratio. Between oil changes, add as needed to maintain oil level.

Engine Tune-Up and Flush (Recommended Price: RM20.00)
Bardahl Engine Tune-Up & Flush is a concentrated blend of solvents, dispersants and detergents with unique Polar Plus Triple Protection Formula to clean dirty engines and inhibit further deposit formation.

It removes deposits and holds them in suspension until they are drained with engine oil. After flushing, your engine will restore pep and power and run smoother with better fuel economy. It is specially formulated to meet or exceed vehicle manufacturers’ stringent OEM specifications.

Great Benefits and Better Solutions
• 3 layer protection against friction, heat and wear
• Removes harmful deposits in dirty engine
• Inhibits deposit formation
• Restores power and performance
• Frees sticky valves and lifters
• Loosens stuck piston rings
• Smoother, quieter running engine
• Improves fuel economy
• Longer engine life

When to Use It
Best to start use before problems occur or when your car shows signs of:
• Dirty engine with harmful gums, varnish and sludge deposits
• Sticky valves
• Stuck piston rings

Do It Yourself. It’s Easy!
1. For all petrol and diesel engines.
2. Add one can into crankcase before oil change. Allow it to work while driving 150 to 300 km or run engine at fast idle for 20 to 30 minutes.
3. Change oil and filter.
4. Add one can of Bardahl B1 Engine Treatment to the fresh engine oil for extra protection of the cleaned engine.
5. For effective maintenance, use every 20,000 km or shorter frequency as needed depending on engine conditions.

Gear Oil Additive + Stop Leak (Recommended Price: RM28.00)
Bardahl Gear Oil Additive + Stop Leak enhances anti-wear and extreme pressure performance of the gear oil. It contains Polar Plus Triple Protection Formula, superior extreme pressure chemistry and seal well conditioner that will reduce friction and wear, withstand high load pressure, clear away deposits, restore seal pliability and prevent and stop leaks.

Great Benefits and Better Solutions
• 3 layer protection against friction, heat and wear
• Stops gearbox leaks
• Cleans gasket grooves
• Longer life of gear box and gear oil
• Smooth gear changes
• Increases load carrying
• Improves fuel economy
• Reduces maintenance and repair costs

When to Use It
Best to start use before problems occur or when your gear box shows signs of:
• Excessive gear noise
• Difficulty in changing gears
• Overheating gearbox
• Leaking gearbox

Do It Yourself. It’s Easy!
1. For all manual gears and differentials; also for industrial gear applications.
2. Add contents to gearbox or differentials in place of an equal amount of gear oil.
3. For general industrial application, add at 10% treatment ratio to gear oil.

Gas+ (Recommended Price: RM10.00)
Bardahl Gas+ is specially formulated with detergent, polymer and solvent compounds to maintain cleanliness of fuel systems.

It is inexpensive, safe and effective to help you overcome your fuel system problems. The lubricant chemistry of Gas+ is ash less and does not leave behind any deposits of its own.

Use of Gas+ will keep your injectors clean and ensure excellent fuel atomization. It also protects fuel injector tips, fuel lines and fuel tank against rust and corrosion.

Great Benefits and Better Solutions
• Prevents corrosion of injectors and fuel tank
• Removes deposits and water
• Keeps fuel injectors clean
• Lubricates upper cylinder and cam
• Improves power and drivability
• Improves fuel economy
• No more costly fuel system repair

When to Use It
Best to start use before problems occur or when your car shows signs of:
• Rough idling
• Hard Starting
• Lags on acceleration
• High fuel consumption
• Rusty fuel tank

Do It Yourself. It’s Easy!
1. For all types of petrol engine.
2. Add one bottle and top up with one tank full of petrol.
3. One bottle treats up to 60L of petrol.
4. Best use regularly with every tank full or as often as you need.
5. For fast clean-up use Injector & Carburetor Cleaner.

Injector & Carburetor Cleaner (Recommended Price: RM16.00)
Bardahl Injector & Carburetor Cleaner is designed to meet, even exceed OEM requirements of vehicles for cleaner fuel system.

It is specially formulated with powerful detergent, ‘synthetic polyetheramine’, dispersants and other lubricant chemistries to maintain cleanliness of fuel system. It provides quick and superior cleaning action with just one tank treatment.

It prevents stalling and hesitation and promotes fast starting. It also protects fuel injector tips, fuel lines and fuel tank against rust and corrosion.

Great Benefits and Better Solutions
• One tank cleanup of entire injection system
• Cleans injectors and intake valves
• Removes deposits
• Removes water
• Prevents rust and corrosion of injectors and fuel tank
• Improves drivability and acceleration
• Improves fuel economy
• Prevents costly fuel system repair

When to Use It
Best to start use before problems occur or when your car shows signs of:
• Rough idling
• Hard Starting
• Lags on acceleration
• High fuel consumption
• Rust or corrosion of fuel tank

Do It Yourself. It’s Easy!
1. For all types of petrol engine.
2. Add one bottle and top up with one tank full of petrol.
3. One bottle treats up to 60L of petrol.
4. Use every 5,000 km.
5. In between, use Bardahl Gas+ regularly to keep fuel system free of contaminants.

Octane Booster (Recommended Price: RM17.00)
Bardahl Octane Booster contains superior octane enhancing, deposit cleaning, anti-wear and combustion improving chemistries.

It offers you a cheap and fast way of pepping up engine power, improving fuel economy at the same time preventing engine knock and ‘run on’ problems.

Just add one bottle of Octane Booster to your full tank of RON95 petrol and you will be pleasantly surprised that the extra power you obtain may even exceed what you will get from using the costly RON97 petrol! It is indeed a no brainer that will save you plenty of money.

Great Benefits and Better Solutions
• Increases petrol octane rating by up to 5 points
• Stops pinging and knocking
• Reduces combustion chamber deposits
• Lubricates valves and upper cylinders
• Protects exhaust valves against wear
• Improves power & fuel economy
• Saves money

When to Use It
• When RON 97 becomes too expensive, it makes economic sense to use it as a substitute.
• When engine pings and knocks.

Do It Yourself. It’s Easy!
1. For use in all types of petrol vehicle.
2. Add one bottle and top up with one tank full of petrol.
3. One bottle treats up 60L of petrol.

Diesel+ (Recommended Price: RM17.00)
Bardahl Diesel+ is a superior diesel combustion improver that will resolve poor quality diesel fuel issue. It is formulated to meet or exceed OEM specifications of vehicle manufacturers and is especially suitable for conventional diesel vehicles for boosting engine power and performance, saving fuel and reducing repair costs in the long run.

It contains powerful cetane enhancer and blend of chemistries to increase cetane value, clean fuel system, improve fuel lubricity and stability.

Great Benefits and Better Solutions
• Increases cetane rating
• Improves engine power & performance
• Cleans injectors and entire fuel system
• Improves fuel economy
• Reduces repair costs
• Reduces deposit formation
• Reduces smoke and harmful emissions
• Stops rust and corrosion
• Reduces injector and fuel pump wear

When to Use It
Best to start use before problems occur or when your car shows signs of:
• Hard starting
• Lost Power
• Excessive exhaust smokes
• High fuel consumption
• Rusty fuel tank

Do It Yourself. It’s Easy!
1. For all types of diesel engine.
2. Add contents and top up with one tank full of diesel. One bottle treats up to 125L of diesel.
3. Use every 5,000 km or as frequently as needed in areas with poor quality diesel fuels.

CRDI Cleaner (Recommended Price: RM29.00)
Bardahl CRDI Cleaner is the most advanced cleaner in the world for modern CRDI injection systems. It is specially formulated with advanced deposit control technology to meet the needs of modern diesel injection systems.

Bardahl CRDI Cleaner cleans the diesel fuel system with just one tank to remove deposits and prevents injector failure.

Great Benefits and Better Solutions
• Removes deposits
• Prevents injector failure
• Prevents nozzle coking
• Improves power and performance
• Effective in cleaning modern electronic injectors
• Safe to use as often as needed
• Compatible with all common diesel system components and control devices

When to Use It
Best to start use before problems occur. Nozzle fouling deposits can occur in nozzle spray holes and exterior tips of nozzles. They cause reduced fuel flow rate and improper spraying patterns leading to following problems:
• Poor starting
• Loss of power
• Rough engine operations
• Increased emissions
• Reduce fuel economy

Do It Yourself. It’s Easy!
1. For all CRDI diesel injection systems. Also effective in cleaning conventional, mechanical diesel injection systems.
2. Add contents and top up with one tank full of diesel. One bottle treats up to 60L of diesel.
3. Use every 5,000 km or as frequently as needed in areas with poor quality diesel fuels.

Product Liability Insurance

Monday 9 June 2014

Bardahl 无油行驶创举

Bardahl ujian 'Perjalanan Tanpa Minyak'

Bardahl B1 "No Oil Run" in Malaysia (MY) 1999 - English

Wednesday 18 December 2013

BARDAHL Experience Feedback Program

Friday 13 December 2013

Bardahl Engine Oils Series (C60 Super Lubes)

Tuesday 10 December 2013

Bardahl Additives Series